Where To Get Rotors Turned?

Turning rotors can be a real pain in the butt. You need to find someone who can do it quickly and cheaply. So, where do you go? You might have looked at a few places and found that their quality of work is generally pretty poor. They are either too slow or the prices are way too high.

This article will provide you with the top places to go to get your rotors turned.

What is Rotor Turning?

The purpose of a rotor is to rotate the blade at the same speed as the vehicle. Rotors can be turned in several ways. The most common method is to machine them with a lathe. The result is an evenly rotating rotor that has good heat dissipation properties. However, this method can be expensive and take time. It’s also not the fastest way to do it.

The second way is to machine them on a CNC milling machine. This way, they are machined perfectly flat and it only takes a few minutes to turn them. This method costs less than the lathe, but is still not cheap since it takes time and machines up quickly.

There are also some who would prefer to get their rotors turned by hand, which can also be done for less money than the lathe or CNC machines and takes even less time than the machining on a milling machine would take to turn them by hand.

However, if you have no experience turning rotors by hand, then this could be a dangerous thing for you because you could easily hurt yourself trying to do it by hand. If you have no experience at all, then you might want to find someone who does this kind of work.

What Does it Cost to Get Rotors Turned?

If you are only looking for a simple rotator, then it will probably cost you between $15 and $25 to get your rotors turned. If you want something that is more complex, like one that has been profiled to reduce the drag on the rotor, then expect to pay about $50 to $200 for the job.

The price will depend on how complicated the job is and how many rotors need to be done at once. Also, if you are not sure what kind of work needs to be done, then expect to pay a little more since the price is not negotiable until you find out what kind of work needs to be done.

What Quality Should I Expect?

When getting your rotors turned, you should expect a good quality product. Most people want them turned so they can be machined so they can fit their particular application as well as keep them looking good for years after they have been installed. However, there are those who would rather just turn them on a lathe or CNC machine and put them in their vehicle without having any quality control measures in place. This can lead to problems with wear and tear over time.

The best way to make sure you get a quality product is to find someone who has done it before. Look for people who have a track record of good work and have been doing it for years. They will know what the issues are with different kinds of applications and they will know how to fix them if they happen.

When you are looking for someone to do this kind of work, then look for references from people who have had the same kind of rotator turned in the past. They will tell you about how well it was done and how long it lasted before needing repair or replacement. They will also be able to tell you about any problems that were encountered while getting their rotors turned, which could be the cause of your current problem.

You can also ask around at your local mechanic shops, but some mechanics don’t even know what a rotor is and others don’t care if their rotors are worn out or not. This means that they won’t give you any references either.

Instead, go online and search for local shops that do this kind of work on a regular basis and ask them where they would recommend someone else turn their rotors if they were in need of this kind of work.

3 Top Places to Get Rotor Turning

There are a lot of different places that can turn rotors. However, the following are the top places to go to get your rotors turned. They are all high quality shops that do this kind of work on a regular basis and have been doing it for years.

Firestone Complete Auto Care

For over 90 years, Firestone Complete Auto Care has been turning rotors for customers from around the country. Their customers come from as far away as many different states to get their rotors turned. Due to its popularity, the shop now has branches all over the country.

Meineke Car Care Center

Meineke Car Care Center has over 900 branches and has been turning rotors for over 50 years. They do work on any kind of application and turn rotors from just about any vehicle you can think of including cars, race cars, bicycles, ATVs and lawn mowers. They also do custom work like getting wheel hubs replaced or having their brake drums powder coated for more grip on wet roads or with tire treads worn down by use of different wheels or tires with different tread patterns to keep your vehicle from having a slip.

Precision Tune Auto Care

Precision Tune Auto Care has been turning rotors for over 40 years and does just about any kind of custom work you can think of to make your rotator fit perfectly with your vehicle. They also do a lot of work on ATVs and lawn mowers. Their customers come from all over the country to get their rotators turned and they have more than 250 branches all around the country.

Final Thought

Turning rotors can be a real pain in the butt if you don’t know where to go or who to trust with your vehicle’s brakes and steering components. However, with the top places mentioned above, you will be able to get the job done right and save yourself some money as well as keep your car looking good for years after you have had it installed.